The place for all things wine, focused on serious wine discussions.

I'm breaking screw-pulls!!

Moderators: Jenise, Robin Garr, David M. Bueker

no avatar
User

Jim Grow

Rank

Wine guru

Posts

1248

Joined

Sun Mar 26, 2006 11:31 am

Location

Rockbridge Ohio

I'm breaking screw-pulls!!

by Jim Grow » Fri Feb 09, 2007 5:04 pm

In the last 6 months, I've broken 2 screw-pulls, one a pocket style and the other a style that fits in a stand-up plastic case. In both cases the broken part is the handle that fits into the square hole and both offending corks were from German wines, which I find ecpecially strange. I have just fashioned a wooden turn handle out of Bruce flooring, very strong, so I'll test it tonight. Has anyone else broken this type if opener?
no avatar
User

Redwinger

Rank

Wine guru

Posts

4038

Joined

Wed Mar 22, 2006 2:36 pm

Location

Way Down South In Indiana, USA

Re: I'm breaking screw-pulls!!

by Redwinger » Fri Feb 09, 2007 5:11 pm

Jim,
I've never broken s screwpull. But I have heard reports/rumors that they do a decent job of standing behind their products, so you just might want to give them a call and explain your experience(s). 877.273.8738
Bill
Post edited to add Ph#
Smile, it gives your face something to do!
no avatar
User

Alan A.

Rank

Wine geek

Posts

68

Joined

Thu Apr 13, 2006 3:22 pm

Location

Being blue deep within a red state.

Re: I'm breaking screw-pulls!!

by Alan A. » Fri Feb 09, 2007 5:19 pm

I've broken 2 in the last few months.

The first was the original design that served me well for nearly 10 years before giving up the ghost....

Image

My replacement 3-in-1 crumbled only after a only few months.....

Image

Bad design! :x
Last edited by Alan A. on Fri Feb 09, 2007 5:19 pm, edited 1 time in total.
no avatar
User

Robin Garr

Rank

Forum Janitor

Posts

21609

Joined

Fri Feb 17, 2006 1:44 pm

Location

Louisville, KY

Re: I'm breaking screw-pulls!!

by Robin Garr » Fri Feb 09, 2007 5:19 pm

Jim Grow wrote:Has anyone else broken this type if opener?


Sure have! I demolished two this way, Jim ... if I recall correctly, both on small-bore, tightly fitted Italian wines. That's when I went back to the basic, foolproof waiter's model to stay. After you set aside all the cool gimmicks out there, there's nothing more functional around, with extra credit if you go with the two-stage lever Pulltap model.
no avatar
User

Jim Grow

Rank

Wine guru

Posts

1248

Joined

Sun Mar 26, 2006 11:31 am

Location

Rockbridge Ohio

Re: I'm breaking screw-pulls!!

by Jim Grow » Fri Feb 09, 2007 5:25 pm

I guess I have some company. Maybe I'll drop them an E-mail or call and see if they can just replace the turn handle.
no avatar
User

Håvard Flatland

Rank

Wine geek

Posts

53

Joined

Mon Jan 08, 2007 11:48 pm

Location

Bergen, Norway

Re: I'm breaking screw-pulls!!

by Håvard Flatland » Fri Feb 09, 2007 5:32 pm

I have a 2-gear Pulltap bought chez Chapoutier in Tain that works fine. With the money I saved on a cheap wine opener I got some nice hubcaps and bumber stickers for my wine rack. :lol:
no avatar
User

Carl Eppig

Rank

Our Maine man

Posts

4149

Joined

Tue Jun 13, 2006 1:38 pm

Location

Middleton, NH, USA

Re: I'm breaking screw-pulls!!

by Carl Eppig » Fri Feb 09, 2007 5:38 pm

We have one exactly like the first one Alan shows. We use it for pulling corks with no problems. For synthetics, composites, plastics, and all others we use a monster maul, that is a waiters pal that measures at least a half inch across. That will yank anything.
no avatar
User

Jay Labrador

Rank

J-Lab's in da house!

Posts

1335

Joined

Fri Mar 24, 2006 10:34 am

Location

Manila, Philippines

Re: I'm breaking screw-pulls!!

by Jay Labrador » Fri Feb 09, 2007 11:28 pm

Same thing happened to me once and once to my brother. I've rarely used a Screwpull since then and now usually use a waiter's friend or ah-so.
no avatar
User

Paul Winalski

Rank

Wok Wielder

Posts

7957

Joined

Wed Mar 22, 2006 9:16 pm

Location

Merrimack, New Hampshire

Re: I'm breaking screw-pulls!!

by Paul Winalski » Fri Feb 09, 2007 11:42 pm

It's happened to me only once, with a 15 year old Screwpull, versus an exceptionally stuck and long Bordeaux cork. A waiter's-type lever screw later succeeded in only drilling a hole through the cork. An Ah-So style opener eventually pushed the cork into the bottle, which was a positive development only in that it let me decant the bottle contents, albeit clumsily.

I have to confess that my cork remover of choice these days is a "waiter's friend" lever-type that I got from a Loire producer in Sancerre. I have a Screwpull that I use on mushy Port corks, or in other situations where I think the lever-type won't work.

As a last resort, there's always sabering.

-Paul W.
no avatar
User

Rod Miller

Rank

Ultra geek

Posts

131

Joined

Sat Oct 28, 2006 5:52 pm

Location

El Dorado, CA

Re: I'm breaking screw-pulls!!

by Rod Miller » Sat Feb 10, 2007 12:51 am

I like the gas type for regular corks and the waiter's friend composite and synthetic. Composite corks are more like synthetic corks than natural cork. They hold the volitale oak aroma and they are b... to take out.
May all beings find happiness and the causes of happiness!!!!
no avatar
User

Carl Eppig

Rank

Our Maine man

Posts

4149

Joined

Tue Jun 13, 2006 1:38 pm

Location

Middleton, NH, USA

Re: I'm breaking screw-pulls!!

by Carl Eppig » Sat Feb 10, 2007 11:38 am

Composites and synthetics also peel the Teflon off your worm; that's the main reason why we don't use a Screwpull on them.
no avatar
User

Victorwine

Rank

Wine guru

Posts

2031

Joined

Thu May 18, 2006 9:51 pm

Re: I'm breaking screw-pulls!!

by Victorwine » Sun Feb 11, 2007 11:07 am

Never had a problem with the worm or handle part, but the frame part of the screwpull (the part that is held tightly to the neck of the bottle) has given us some problems. Over the years in my household we have broken two screwpull frames.

Salute
no avatar
User

TimMc

Re: I'm breaking screw-pulls!!

by TimMc » Sun Feb 11, 2007 9:45 pm

A friend of mine solved that problem for me with a "professional strength" table-mounted cork puller he gave me as a birthday gift.

To wit:

Image
no avatar
User

Jon Peterson

Rank

The Court Winer

Posts

2981

Joined

Sat Apr 08, 2006 5:53 pm

Location

The Blue Crab State

Re: I'm breaking screw-pulls!!

by Jon Peterson » Mon Feb 12, 2007 3:34 pm

Tim,
Like you, I have one of the Estate table mounted openers, the chrome one. I love the size and feel of the thing. More importantly, it has never failed me, even when it comes to re-corking. It is currently mounted on the edge of a shelf in my cellar.

Who is online

Users browsing this forum: Patchen Markell, SemrushBot and 2 guests

Powered by phpBB ® | phpBB3 Style by KomiDesign