The place for all things wine, focused on serious wine discussions.

WineAdvisor: Label shoot

Moderators: Jenise, Robin Garr, David M. Bueker

no avatar
User

Robin Garr

Rank

Forum Janitor

Posts

21612

Joined

Fri Feb 17, 2006 1:44 pm

Location

Louisville, KY

WineAdvisor: Label shoot

by Robin Garr » Wed May 31, 2006 7:47 am

<table border="0" align="right" width="172"><tr><td><img src="http://www.wineloverspage.com/graphics/tours.jpg" border="1" align="left"></td></tr><tr><td>The orange color of this Chateau des Tours Brouilly label shot from April 1998 betrays uncorrected color variation from artificial light, and the sharply rounded perspective, deep side shadows and not-quite-level alignment are telltale signs of a quick, careless snapshot.</td></tr></table>Label shoot

Back in the early 1980s, when I started writing about wine, the personal computer was just coming on the scene and digital cameras were far in the future. If I wanted a wine-label image to accompany my column (which of course was printed only on paper), I had a couple of options: I could beg the winery to sent me a clean label (postal mail, of course, not E), or I could try my best to coax the label off my bottle with hot water and, sometimes, a dash of ammonia and a sharp razor blade.

A generation later, the world of wine hasn't changed too much (although that's another good subject for a very long article), but the tools we use to report on it have changed a great deal. From wild-eyed inspiration to your E-mail box, these words never see paper (unless for inscrutable reasons of your own you print it out); and the label images that accompany most of my wine reports come straight from the bottle to the <I>Wine Advisor</i> through the seeming magic of digital photography.

<table border="0" align="left" width="110"><tr><td><img src="http://www.wineloverspage.com/graphics1/mari0527.jpg" border="1" align="left"></td></tr><tr><td>The Marilyn Merlot shot featured in Monday's <i>Wine Advisor</i> was taken using the principles in this article. It takes close observation to see it was photographed on the bottle: Can you pick out the clues?</td></tr></table>It had frankly never occurred to me to write about this process until a couple of you E-mailed me this week to ask about the Marilyn Merlot</b> label featured (for graphics-edition subscribers) in Monday's report. "Where do you get the labels that accompany your report?," asked frequent correspondent Randy S. "Surely you don't have to resort to soaking and/or otherwise removing them yourself?"

Not any more! Frankly, the digital photography revolution came around just in time, as the art of soaking off wine labels - once a relatively easy task - became much more complicated during the 1990s when many of the world's wineries switched over to modern wine bottling lines and labeling machines using sticky-backed labels that cling to the bottle like Crazy Glue and require considerable effort to get off.

I got my first digital camera in the spring of 1998 and started using it for label photos almost immediately. It was a tiny Nikon about the size of a pack of cards, with a lens the size of a green pea and pea-size memory, too; and it made photos that were serviceable at best. (See the Chateau des Tours Brouilly image at right above.)

Over the ensuing years, I've upgraded cameras periodically, and tuned up my my photo-shooting skills and PhotoShop image-tweaking abilities a little more. Just for fun, here's a summary of the how-to-do-it report I sent Randy. If it inspires you to start creating your own digital scrapbook of the wines you enjoy, that's great! And if by chance you're a photography or graphic-arts professional or skilled hobbyist and have tips you'd like to share, I'd love to have them.

1. Use the best quality digital camera and lens you can justify. Mine's a Nikon D-100 digital single-lens reflex, and it serves me well as both a professional and hobby camera ... as well as a wine-label recorder.

2. If you have the option, use a short telephoto lens. Mine's a Nikon AF Nikkor 28-200 zoom. This may seem counter-intuitive for shooting close-ups, but there's a good reason for it: The farther away from the label you can shoot, the less perspective (rounding) effect you get in your photo. You'll also want a camera with fairly high resolution (mine's 6 megapixels) and set it to take a large photo, so when you "crop" the label out of a larger photo, you'll still have a large-enough image to work with. (I need only a small image for online use; if you want an image large enough for printouts, you'll need to get closer.)

3. Take the bottle outside and shoot the label in daylight. Even with an excellent camera, natural light seems to yield more natural color, unless you have a photo studio with professional lighting.

4. Invest in high-quality image-processing software. I use Adobe PhotoShop, but you can get by with less pricey alternatives like Paint Shop Pro or Thumbs Plus. In any case, learn how to use it. A little software manipulation can make a big difference in the results, no matter how carefully you shoot your original. For <i>Wine Advisor</i> label shots, I'll rotate the image if necessary to get the label exactly upright, and follow up with the transform > skew function if necessary to make it perfectly rectangular. Crop the image exactly to the margins, then use the burn and dodge tools with discretion to lighten the shadows that emphasize the perspective effect of the round bottle. Use color correction if necessary to bring any outdoor blue-sky effects back to neutral white. Brightness and contrast adjustment may also be necessary, but use these tools with discretion to avoid "burned out" bright spots. Finally, size the photo to fit its destination space (I generally limit height to 210 pixels or width to 160 pixels to keep your <i>Wine Advisor</i> images down to a lightweight size for E-mail); and finally, try using the "unsharp mask" filter to increase overall sharpness of the image if necessary.

5. Save the finished image, file it, E-mail it to a friend; print it out, or upload it to a Web server and post it on an online wine forum like our WineLovers Discussion Group. Before long you'll have an impressive digital label collection.

Sound like a lot of work? It isn't really ... at least not if you bring a fraction of the enthusiasm to photography that you do to wine.
no avatar
User

Howie Hart

Rank

The Hart of Buffalo

Posts

6389

Joined

Thu Mar 23, 2006 4:13 pm

Location

Niagara Falls, NY

Re: WineAdvisor: Label shoot

by Howie Hart » Wed May 31, 2006 8:33 am

Robin - another simple technique for acquiring the image is to simply place the bottle face down on a scanner. Although I haven't done this with a bottle, I've done it with many 3D objects such as jewelery and plaques. With the moving copy head and light source, the perspective and lighting problems are solved.
no avatar
User

Paul B.

Rank

Hybrid Guru

Posts

2063

Joined

Wed Mar 22, 2006 11:38 pm

Location

Ontario, Canada

Re: WineAdvisor: Label shoot

by Paul B. » Wed May 31, 2006 9:36 am

Howie, I used to do just that with the scanning technique before I got my digital camera. But you couldn't really just place the bottle label-side-down and scan it - you had to roll the label along as the scanner illuminated it. This was so as to get a flat scan of the label. It worked, but was a bit cumbersome - and I always was worried about a heavy bottle putting weight on the glass panel (I generally scanned them when full because reds, especially, would invariably have a "line" or two of purple running down the label after being emptied!).
http://hybridwines.blogspot.ca
no avatar
User

Howie Hart

Rank

The Hart of Buffalo

Posts

6389

Joined

Thu Mar 23, 2006 4:13 pm

Location

Niagara Falls, NY

Re: WineAdvisor: Label shoot

by Howie Hart » Wed May 31, 2006 10:28 am

Paul B. wrote:would invariably have a "line" or two of purple running down the label after being emptied!).

I always lay my bottles down in storage with the label up. Then, after I stand them up and remove the cork, I pour with the label in my hand. My reasoning has to do with any sediment, as it will always stay in the same place, on the same side of the bottle. It just so happens that any drips run down to side of the bottle opposite the label. :wink:
no avatar
User

Paul B.

Rank

Hybrid Guru

Posts

2063

Joined

Wed Mar 22, 2006 11:38 pm

Location

Ontario, Canada

Re: WineAdvisor: Label shoot

by Paul B. » Wed May 31, 2006 10:39 am

"Marilyn Merlot" - :!: What a marketing idea.

Interestingly, tomorrow would have been her 80th birthday.

I always wonder what would have become of icons like MM, Elvis and other famous performers/musicians, etc. had they lived: would they have become the legends they did after their deaths? It is tragic and ironic to think that their fame has probably lingered on posthumously to a greater degree than it would have had they still been with us.
http://hybridwines.blogspot.ca
no avatar
User

Bill Spohn

Rank

He put the 'bar' in 'barrister'

Posts

9458

Joined

Tue Mar 21, 2006 7:31 pm

Location

Vancouver BC

Re: WineAdvisor: Label shoot

by Bill Spohn » Wed May 31, 2006 11:05 am

Paul B. wrote:"I always wonder what would have become of icons like MM, Elvis and other famous performers/musicians, etc. had they lived: .


Elvis would have put out a couple more mediocre albums and died a year or two later from some other self-inflicted health problem.

Marilyn? Think Mae West.

The one I'd have loved to have seen into old age was Jimi Hendrix - the guy was just getting started when ZAP.....
no avatar
User

wnissen

Rank

Wine guru

Posts

1221

Joined

Wed Mar 22, 2006 1:16 pm

Location

Livermore, CA

Re: WineAdvisor: Label shoot

by wnissen » Wed May 31, 2006 11:47 am

Robin,

Thank you for writing up this short guide to label photography. I recently spent pretty much a whole day photographing the contents of my cellar, so I had some experience taking lots of these pictures.

The only thing I'd add is that if you can't shoot in natural light (my preferred illuminant as well) then it's better to set up a tripod rather than use the flash. When I was photographing 150 labels, it just didn't make sense to carry each one from the garage to the living room. Instead, I brought down a couple compact flourescent lamps and set them so the bulb was at bottle height, and positioned them near the neck of the bottle. This minimizes shadows caused by the curved bottle. I then white-balanced my camera, which was absolutely worth it because it saved a lot of color adjusting later on. Finally, I set up a tripod to make the exposure time long enough to capture the image even in the relatively dim light. Plus, then I didn't have to reframe between bottles.

The results aren't perfect (I need to go back and straighten and de-skew) but they're pretty good, even on the annoying labels that occupy more than 180 degrees:

[img=http://www.cellartracker.com/labels/17012.jpg]

Apologies to Eric for stealing his bandwidth.

Walt
Walter Nissen
no avatar
User

Bill Spohn

Rank

He put the 'bar' in 'barrister'

Posts

9458

Joined

Tue Mar 21, 2006 7:31 pm

Location

Vancouver BC

Re: WineAdvisor: Label shoot

by Bill Spohn » Wed May 31, 2006 11:55 am

Modern digital cameras have amazingly good co-ordinated flash control.

I use a semi-pro Minolta and can use the flash for macro photography - the camera cuts back flash intensity and adjusts aperature and shutter speed to suit.

That means that you can shoot close ups of labels without getting fancy (as I have to do with indirect lighting, light tents etc. when shooting old time pieces to avoid glare from crystals).

Aside from rolling a bottle on a scanner, though, I'm not aware that any software allows you to 'flatten' a bottle image. Programs like Photoshop do far more sophisticated manipulation - I guess we just need to agitate for a Photoshop add-on that does this specialised task!

Who is online

Users browsing this forum: Amazonbot, Google [Bot] and 5 guests

Powered by phpBB ® | phpBB3 Style by KomiDesign